SW-20.0III wood Dryer High Frequency Vacuum Wood Dryer

High Frequency Vacuum Wood Dryer Kiln we also name is HF wood dryer.SW-20.0III is the large capacity model high frequency vacuum wood dryer kiln.The capacity is 21.6 cubic meters per full load.Timber cart size can handle wood 8000 X 1800 X 1500MM.The wider timber cart can put 1.8 meters wide wood slabs.

If you the 20 cubic meters capacity HF wood dryer can not meet your demand, we also can customize the dryer for you,welcome send inquirys about HF wood dryer to us.

SWGZ-20.0III wood Dryer parameters

The specification sheet of vacuum kiln as below;

Model	SWGZ-20.0III wood Dryer
Capacity	21.6 cubic meters per full load
Out Dimension	9600x2200x2290mm
Timber Cart Size	8000x1400x1300mm
Max Length of Wood	8000mm
Material pile of pressure device	hydraulic pressure
Pressure device maximum pressure	0～4000 KG

Drying process of wood dryer

We use stainless steel 304 to make the inside of vacuum kiln and pressure plate, including screws and nuts inside of the high frequency vacuum kiln.Our kiln also adopts vacuum dehydration technology. The stainless steel vacuum pump can make the vacuum oven reach -0.093Mpa condition.

The vacuum condition is to let let water vaporized in low temperature below 55 ℃,At the same time, vacuum can also suck the wood moisture out. The machine cooling system will separate the hot air and hot water out, then cool them and release them out.

Wood is drying under a vacuum and wet condition at low temperature. That will ensure wood is no cracks and keep the wood nature color.

High frequency vacuum dry kiln is the best choice to thick table top, veneer, thick slab, expensive wood, hardwood, veneer, beam and etc.